WöschlerOrden

Announcement

Collapse
No announcement yet.

Need help with 25 year NSDAP medal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #91
    Thanks, Ian, and others who have commented/responded.

    Let me ask this question, to add to the assessment and for current/future reference: Are there known fakes/reproductions of this heavier, unmarked type example which bear the left wing flaw?

    John

    Comment


      #92
      Correction

      Sorry, I incorrectly stated this: the die flaw is, in fact, in the upper right wing of the eagle.

      Comment


        #93
        Hi John, sorry I cannot comment on the wing flaw ... I'm sure others will though

        Notice the lack of any frosting or polishing on your example ... It's more noticeable on this 15 year cross (also by Deumer) The outer frame (almost like an Iron Cross) is highly polished whilst the ray burst is frosted with the highlights polished for emphasis. These are the details of quality I was meaning, something the 2nd highest Party service award, after the Gold Party Badge, should have.

        Cheers, Ian.
        Attached Files

        Comment


          #94
          Yes, Ian, I understand what you mean...and that is a handsome 15-year example you show. I had one like that once as well.

          Back to the 25-year award, granted that my example is lacking the polished and frosted features of a cross in excellent condition. My 25-year example is admittedly in poor condition, which does not prevent it from being in the running for possibly being a period original. After all, it is what it is.

          Regarding quality (versus condition) I do recall reading comments in earlier threads on the subject that - surprisingly so for awards of this degree and stature - the overall quality was not as good as one might otherwise expect.

          That is why I am thinking that my example could well be a period original in poor condition...unless examples can be shown of reproductions of the 25-year award which bear the die flaw on the eagle's wing.

          I, as well as you and others I am sure, look forward to knowledgeable feedback on the subject which will further enhance the value of this thread for future reference.

          Best regards,
          John

          Comment


            #95
            Frosting on gold finish? That's a new one to me. I'm aware of Luft awards frosting.



            Is that a thing? Frosting on Gold Awards?




            Stan's post 35. (No frosting) But look at flaw on wing. Stan's hasn't been called a repro as I read thru the beginning of this thread. So...
            Attached Files
            Last edited by Brian S; 03-05-2020, 06:52 PM.

            Comment


              #96
              [QUOTE=Brian S;8661087]Frosting on gold finish? That's a new one to me. I'm aware of Luft awards frosting.

              Is that a thing? Frosting on Gold Awards?

              Yep! You dont see it that often other than on minty pieces but "frosted" gold finish is as common as the "frosted" silver finish on minty flight badges. I cant speak german worth a ... but I think the term used for insignia (which unlike higher decorations is available in different grades/qualities for different prices from the same maker so they describe it as such) is "vergoldet mit poliert kanten"

              A few examples

              JC
              Attached Files

              Comment


                #97
                That means polished edges not 'frosting'. Nothing I have looks like a gold that's frosted. But I'll look again. Fire gilt or plating without polishing might give it a finish that looks unpolished and not bright and that's where the polished edges come in.


                Frosted silver on the other hand actually is a chemical process on silver that does create a very light 'frosting'.

                Comment


                  #98
                  Same thing... The only reason why they bothered to "polish the edges" of a gilt or silver item was to break the overall applied mat/frosty finish so the polished surfaces would show through & stand out from the unpolished surface

                  JC
                  Attached Files

                  Comment


                    #99
                    Getting back to the question I raised in my above postings (#91 & #94), and with reference to comments by others in postings #56 and #62 of this thread: are there known fakes/reproductions of this heavier, unmarked type example which bear the (right) wing flaw?

                    Comment


                      Further to my post immediately above, see also posts #31-36 in this same thread with reference to the wing flaw.

                      Comment


                        Comparative views: heavy version & wing flaw

                        Posting here some comparative photos of heavy versions of this award with the wing flaw shown earlier in this thread - none of which were challenged - in the hope of reaching some consensus.

                        First my example, then Stan's (post 35); then Bob Hritz (post 40); followed by pictures of the flaw - mine and Brian S. (post 31).

                        Thanks for looking,

                        John
                        Attached Files

                        Comment


                          Originally posted by jwburchell View Post
                          Posting here some comparative photos of heavy versions of this award with the wing flaw shown earlier in this thread - none of which were challenged - in the hope of reaching some consensus.

                          First my example, then Stan's (post 35); then Bob Hritz (post 40); followed by pictures of the flaw - mine and Brian S. (post 31).

                          Thanks for looking,

                          John

                          A provoking thought: Could the wing flaw be an indication of a fake ?

                          Comment


                            Now that's an unpleasant suggestion.

                            Comment


                              My Webster dictionary defines "provoking" as "annoying". However, one meaning of the main word "provoke" is "stimulus". I would like to positively interpret the comment by "der-hase-fee" as intended to provide the needed stimulus for further discussion on the subject of the wing flaw on this award, hopefully leading to some acceptable conclusion supported by credible evidence for the current and future benefit of all interested collectors.

                              Traditionally, as I understand it, die flaws have often been considered as a positive identifying characteristic of period original pieces.

                              Comment


                                Germany, NSDAP. A 25 Year Long Service Award

                                Someone committed to buy this fake:


                                m182_6233.jpg

                                m182_6234.jpg

                                Comment

                                Users Viewing this Thread

                                Collapse

                                There are currently 5 users online. 0 members and 5 guests.

                                Most users ever online was 10,032 at 08:13 PM on 09-28-2024.

                                Working...
                                X