Thanks Steve!
-
Antti -
Sir Antti--
Please add an unmarked Ek1 screwback made by "B.H.Mayer"
Merry Christmas,
GregComment
-
Thanks Greg and a Merry Christmas to you too!
AnttiComment
-
Working....AnttiComment
-
Doing my thing.....................AnttiComment
-
WWI EK 1 maker
Hi all,
I have an EKI WWI, 3 piece with magnetic core, the pin back is stamped 4. Were numbers used as a makers mark in WWI. Could this be a later manufactured piece or copy? HELP!!!
Comment
-
Mate, you'd best start a seperate thread to find out if your cross is ok before posting here. Thank you.AnttiComment
-
All crosses pinback, uncased, three piece construction and magnetic unless otherwise specified.
Summa Summarum part 7
"800"
4
3 vaulted
1 Screwback double post
1 Screwback double post (back plate missing)
3 Vaulted screwback a. Clutch: "800" with two 6 pointed stars
1 Vaulted screwback a. Clutch: Screws at 12 and 6 o'clock b. Plate: No Plate c. Cross: "800"
1 Convex double post screwback with backing plate
1 Convex double post screwback with round backing plate and round screws.
1 Convex single post screwback with backing disk and nut
1 800 Convex single post screwback, with 800 marked backing plate and with raised handle locking device marked 800 and also D.R.G.M. and 653146.
1 800 Convex single post screwback, with round locking device/backing plate also marked 800
1 800 Convex single post screwback, with round backing plat and round male locking device.
1 800 Convex single post screwback, with small round backing plate with a even smaller round male locking device. This IC is engraved and dated.
1 Screwback single post with backplate also marked 800
1 Screwback single post
1 Screwback single post, 3 piece construction
1 Screwback single post with "Rayback" style back plate
1 Screwback with two six pointed stars on handled locknut
1 Screwback, large disc marked 800, crown and moon and a mark that looks like a tea table with three legs and a bar across the center column
1 Convex (coke-bottle pin)
1 Convex (wide pin)
"935"
1
"950"
1
"AWS"
1 pillowback
1 screwback (pillowback) with brass frame
1 screwback, also marked "925"
"CD 800"
5
1 with mark removed from hatebelt
"D.R.G.M"
1 Vaulted, screwback, a. Clutch: DRGM 653146, b. Cross: Meybauer Crest c. Cross: "900"
1 Vaulted, screwback a. Clutch: DRGM 653146, "800", PM, b. Plate: 500 c. Cross: "938"
1 Vaulted screwback a. Clutch: DRGM 653146
1 Vaulted screwback a. Clutch: DRGM 653146, 800 b. Plate: 500 c. Cross: "800"
1 with with "800" on pin with lock (folding) at catch
1 Screwback single post with missing backplate
1 with the backplate and handled screw marked "drgm" and "653146"
"FR"
2
3 Fr
1 Fr.
"Godet"
1 cased, marked "G" on pin
1 marked "G"
1 marked Godet - Berlin on pin
1 with stabilizing hooks and marked Godet - Berlin on pin
1 with stabilizing hooks and marked Godet - Berlin on pin, engraved to awardee
2 with stabilizing hooks
"Hansen"
1 screwback marked "M. HANSEN" and "D.R.G.M. ANGEM."
1 Screwback with "800", halfmoon and crown
"H.B.G"
3
"J.H.Werner, Berlin"
2
"K"
1 cased, mark under catch, case inscribed
"K.A.G."
1 cased, case inscribed
5
1 marked "800", engraved
"KMST"
1 also marked "DRGM"
1 with sliding hook attachment, marked "DRGM" and "800"
"KO"
19
1 engraved to general Thofern (?)
"Meybauer"
1 also marked "800"
1 vaulted with Meybauer crest
1 convex
1 screwback
1 screwback with a zinc cruciform back plate
1 screwback with cruciform shaped back plate
"PM 800"
1 convex screwback with EK shaped plate etc.
"backward P"
1 with mark inside of pin, engraved
"R.D.G.M"
1 Screwback single post with "800" on the cross, ".500" on the backing, ".800" on the screw and R.D.G.M. 633146
"RW"
1
"Silber"
1 convex with gunmetal core
"SW"
1
2 S-W
"Victoria D.R.G.M"
2 Screwback single post
1 convex screwback, all nickel
1 Unmarked Convex single post screwback with round backing plate that is also a female locking device. Mark in the back plate
Wagner & Sohn
4 "WS"
1 "WS" with backward E resting on left verticle of A on back of pin
1 "WS" with L on pin
1 "WS" J or backward L under the pin
1 "WS" with O under the pin
1 "W" on pin, large cross, 46x46mm, small symbols
1 "W" with "900"
"Y"
1 "800" on cross and "800" on pin with mark on the back of the pin
"Square"
3
1 convex
1 converted into a screwback
"Halfmoon, crown, 938"
1 convex screwback, plate marked 800
PrinzenGrosse
1-single post screwback Prinzen (1/2 sized-22.5mm x 22.5mm)
"Cloth"
1 black velvet with very worn silver bullion
Unmarked
6
1 "AWS" pillowback screwback
1 "B.H. Mayer", screwback
1 cased, vaulted, engraved "Herm Busch/Rudolfstr 8", Non-magnetic one piece construction
1 with shrapnel damage
1 made from stamped sheet metall i.e. light version
1, 1 piece construction, brass
1 with brass frame
1, 1 piece construction
1 double screwpost with cruciform shaped back plate
2 single post screwback
1 plated convex with clamshell screwback
1 clamshell screwback
1 double post screwback with large plate
1 with sunburst screw plate and hinged spange w two prongs
1 screwback with small concave circle, separate locknut with separated edge, non-magnetic
1 screwback with sunburst plate, spange, one piece, non-magnetic
1 vaulted with pebbled core, non-magnetic
3 vaulted
1 vaulted with additional stabilizing clasp above hook
1 semi-vaulted screwback with round backing plate & cloth covered locking nut
1 convex with nickel frame and bronze core
1 converted to homemade screwback
2 convex plated frame
1 engraved
1939
"L/11"
1
"L/12"
1
1 cased, vaulted
"L/13"
2
"L/52"
2
"L/57"
1
"L/59"
1
"We"
1
Unmarked
3
1 brass construction, one-piece
1 L/26
Special
1 Iron center
Thank you for your time and support!
AnttiComment
-
-
No problem mate.AnttiComment
-
Hi Antti,
Here is another EK1 for the list. I am note sure how to list it
so here is the link.
http://dev.wehrmacht-awards.com/foru...d.php?t=269960
I'll let you figure where it fits the list.
regards,
GregComment
-
Thanks Greg, I'll find a way..
AnttiComment
-
Working..AnttiComment
-
Doing my thing....AnttiComment
-
Working....AnttiComment
Comment