Imperial EK1 rarity stats!

[Blitz]

Thanks Steve!

[Steve Campbell]

No problem Blitz. Keep up the good work. Also put me down for another one.

A Meybauer pin back, marked with the Meybauer symbol on the rear.

[Dave Danner]

I have 5 total: 2 unmarked vaulted examples, 2 KOs, and 1 S-W.

[Blitz]

Summa Summarum part 6

"800"
4
1 Screwback double post
1 Screwback double post (back plate missing)
1 Convex double post screwback with backing plate
1 Convex double post screwback with round backing plate and round screws.
1 Convex single post screwback with backing disk and nut
1 800 Convex single post screwback, with 800 marked backing plate and with raised handle locking device marked 800 and also D.R.G.M. and 653146.
1 800 Convex single post screwback, with round locking device/backing plate also marked 800
1 800 Convex single post screwback, with round backing plat and round male locking device.
1 800 Convex single post screwback, with small round backing plate with a even smaller round male locking device. This IC is engraved and dated.
1 Screwback single post with backplate also marked 800
1 Screwback single post
1 Screwback single post, 3 piece construction
1 Screwback single post with "Rayback" style back plate
1 Screwback with two six pointed stars on handled locknut
1 Screwback, large disc marked 800, crown and moon and a mark that looks like a tea table with three legs and a bar across the center column
1 Convex (coke-bottle pin)
1 Convex (wide pin)

"950"
1

"AWS"
1 pillowback
1 screwback (pillowback) with brass frame
1 screwback, also marked "925"

"CD 800"
3
1 with mark removed from hatebelt

"D.R.G.M"
1 with with "800" on pin with lock (folding) at catch
1 Screwback single post with missing backplate
1 with the backplate and handled screw marked "drgm" and "653146"

"FR"
2
1 Fr
1 Fr.

"Godet"
1 marked "G"
1 marked Godet - Berlin on pin
1 with stabilizing hooks and marked Godet - Berlin on pin
2 with stabilizing hooks

"Hansen"
1 screwback marked "M. HANSEN" and "D.R.G.M. ANGEM."
1 Screwback with "800", halfmoon and crown

"H.B.G"
3

"J.H.Werner, Berlin"
2

"K.A.G."
4
1 marked "800", engraved

"KMST"
1 also marked "DRGM"
1 with sliding hook attachment, marked "DRGM" and "800"

"KO"
19
1 engraved to general Thofern (?)

"Meybauer"
1 also marked "800"
1 convex
1 screwback
1 screwback with a zinc cruciform back plate
1 screwback with cruciform shaped back plate

"PM 800"
1 convex screwback with EK shaped plate etc.

"backward P"
1 with mark inside of pin, engraved

"R.D.G.M"
1 Screwback single post with "800" on the cross, ".500" on the backing, ".800" on the screw and R.D.G.M. 633146

"RW"
1

"Silber"
1 convex with gunmetal core

"SW"
1
2 S-W

"Victoria D.R.G.M"
2 Screwback single post
1 convex screwback, all nickel
1 Unmarked Convex single post screwback with round backing plate that is also a female locking device. Mark in the back plate

Wagner & Sohn
3 "WS"
1 "WS" with backward E resting on left verticle of A on back of pin
1 "WS" J or backward L under the pin
1 "WS" with O under the pin
1 "W" on pin, large cross, 46x46mm, small symbols
1 "W" with "900"

"Y"
1 "800" on cross and "800" on pin with mark on the back of the pin

"Square"
3
1 convex
1 converted into a screwback

"Halfmoon, crown, 938"
1 convex screwback, plate marked 800

PrinzenGrosse
1-single post screwback Prinzen (1/2 sized-22.5mm x 22.5mm)

"Cloth"
1 black velvet with very worn silver bullion

Unmarked
5
1 with shrapnel damage
1 made from stamped sheet metall i.e. light version
1, 1 piece construction, brass
1 with brass frame
1, 1 piece construction
1 double screwpost with cruciform shaped back plate
2 single post screwback
1 plated convex with clamshell screwback
1 clamshell screwback
1 double post screwback with large plate
1 with sunburst screw plate and hinged spange w two prongs
1 screwback with small concave circle, separate locknut with separated edge, non-magnetic
1 screwback with sunburst plate, spange, one piece, non-magnetic
1 vaulted with pebbled core, non-magnetic
2 vaulted
1 convex with nickel frame and bronze core
1 converted to homemade screwback
2 convex plated frame
1 engraved

1939
1 L/11
2 L/13
1 L/12
2 L/52
1 L/57
1 L/59
1 "We"

Unmarked
3
1 brass construction, one-piece
1 L/26

Special
1 Iron center

Thank you for your time and support!

[Blitz]

Working.....

[Blitz]

Doing my thing...

[Blitz]

Working..

[Blitz]

Doing my thing.......

[Stepdale]

Here's my small contribution:

1 vaulted pinback marked 800 on reverse

1 pinback with two added stabilizing pins, engraved to awardee, marked Godet Berlin on pin

1 cased vaulted pinback marked L/12 on reverse

1 vaulted unmarked pinback

1 vaulted unmarked pinback w/ additional stabilizing clasp above hook

1 unmarked semi-vaulted screwback w/ round backing plate & cloth covered locking nut

Dale

[rfleming32]

Here are mine for the log

1. EK1, cased, "G" on pin, Godet Maker Mark
2. EK1, cased, "K" under catch, case inscribed - "Kaiser …."
3. EK1, cased, "K.A.G.", inscribed case "Infantry Regiment 99 ..."
4. EK1, cased, vaulted, engraved "Herm Busch/Rudolfstr 8", Non-magnetic one piece
5. EK1, uncased, Vaulted, Screw-back, a. Clutch: DRGM 653146, b. Cross: Meybauer Crest c. Cross: 900 Stamp
6. EK1, uncased, Vaulted, Screw-back a. Clutch: DRGM 653146, 800, PM, b. Plate: 500 c. Cross: 938 Stamp Desireable high silver content
7. EK1, uncased, Vaulted Screw-back a. Clutch: DRGM 653146 b. Plate: None c. Cross: None
8. EK1, uncased, Vaulted Screw-back a. Clutch: DRGM 653146, 800 b. Plate: 500 c. Cross: 800
9. EK1, uncased, Vaulted Screw-back a. Clutch: 800 with two 6 pointed stars b. Plate: None c. Cross: None
10. EK1, uncased, Vaulted Screw-back a. Clutch: 800 with two 6 pointed stars b. Plate: None c. Cross: None
11. EK1, uncased, Vaulted Screw-back a. Clutch: 800 with two 6 pointed stars b. Plate: None c. Cross: None
12. EK1, uncased, Vaulted Screw-back a. Clutch: Screws at 12 and 6 o'clock b. Plate: No Plate c. Cross: 800
13. EK1, uncased, WS with L on pin - Maker is Wagner and Son
14. EK1, uncased, CD 800, Very desireable unknown maker
15. EK1, uncased, WS, Maker is Wagner and Son
16. EK1 Vaulted, uncased, Meybauer Crest
17. EK1 Vaulted, uncased, "935" - 935 Silver Content
18. EK1 Vaulted, uncased, "800" on pin 800 Silver Content
19. EK1 Vaulted, uncased, "800" recessed - 800 Silver Content

[Steve Campbell]

Put me down for 3 more EK1s. They are:

An AWS pillowback screwback, unmarked.

A marked CD800

A KAG, marked on the pin.

Thanks, Steve

[gregM]

Hi Antti,
Please add another "Fr" and another 1 piece unmarked.

Thanks,
Greg

[Blitz]

Thanks a bunch Guys!

[Blitz]

Doing my thing...

[Steve Campbell]

I forgot to add a recently aquired Fr pinback. Steve