Announcement
Collapse
No announcement yet.
Kommandantur or wagon eagle
Collapse
X
-
Raph, I wish I could examine this one in person. It would take all but 10 seconds to determine if its authentic.
Here are my concerns:
1. Extremely rough casting. I don't like what I see. Yes, this could be corrosion, but it may be a poor reproduction casting.
2. No manufacturer markings or any markings for that matter.
3. Mounting studs that were molded and not machined/threaded. This example has a non-standard stud with inner threading. Wilhelm Saris documented this type of stud in his book "Reichsbahn Eagles" on page 227 illustration g. He describes it as follows: "stud with inner threading. Occasionally it is thought that this form was used on fakes, but official drawings indicate it was actually done at that time." This type of stud is not common and I've yet to see one in person.
Sorry...but I'll need more pictures of the following:
1. Top of the eagles head, meaning the edge/side.
2. Top or bottom of the wing edges.
3. A close up of the backside of the eagles breast (see below pic of circled area where to focus)
4. A close up of the backside of the eagles right wing (bottom feather - see below pic of circled area where to focus).
-MikeAttached FilesLast edited by Berghof; 11-09-2018, 10:55 AM.
Comment
-
Originally posted by mrec27777 View Postwonder why it has cut-outs above both wing studs?..and is stud metric threaded?...just a thought ..
I hate like hell to condemn anything before I get to see a few different areas on it. Pictures and lighting can deceive/exaggerate surface finish. I can't imagine someone tossing this into the scrap pile if it's real.
Although the mounting studs aren't traditional, I haven't seen them this way on any repro. The fact that Wilhelm points out this style stud being on blueprints makes me want to take the extra step and ask for additional photos. As I said before, I haven't had an eagle with this stud configuration in my hands before. This one intrigues me. Believe me...this thing is rough, but I'd feel better if I had more pictures before making a final decision. It has a few things going for it.
.Attached FilesLast edited by Berghof; 11-10-2018, 06:33 PM.
Comment
-
I agree with JR and Military, I was trying to walk through this step by step to educate.
It's a copy of an Henschel-Werke (HE) adler. The longer than normal mounting studs (on a repro) made me 2nd guess at first...but once I saw the horribly casted HE and composition marks, lack of machining on the studs, I knew this wasn't good...HE never made a stud config like this...or at least I never saw one like it. Every HE example I handled had stamps on the studs (perhaps inspection stamps?).
All in all, It's a poorly cast reproduction. If this eagle was a victim of age/corrosion, you would expect all surfaces to be equally corroded...and they are not. Also, if the stud was unfinished, it would be conical shaped.
I would still like RAPH to upload the photos of the wing tops and head so everyone can see the difference between the photos I submitted.
.
Comment
-
If it's not too much trouble, are you able to post the other pictures? I think it would be helpful to future collectors. This stuff may be obvious for us that deal with this day in and day out, but it's not obvious to the average collector.
Also, are the pics you provided linked or uploaded? If they are linked, I'll pull them off this thread and upload. Linked pictures tend to go away over time and this thread will not be helpful.
Thanks!
Mike
Comment
-
Originally posted by JR. View PostAn obvious post war repop, without a single doubt.
Comment
Users Viewing this Thread
Collapse
There is currently 0 user online. 0 members and 0 guests.
Most users ever online was 10,032 at 08:13 PM on 09-28-2024.
Comment