CollectorToCollector

Announcement

Collapse
No announcement yet.

Question MP44

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Question MP44

    Hello, I have some questions about the MP44, please give me your opinions about it.
    Are all the barrels makermarked, or did they resume this at the and of the war?
    The picture that I show here has the lettercode of Haenel, FXO is this the common letter type ? I have never seen this one.
    What is the meaning of the lettercode aqr?

    All comments are welcome

    #2
    mp44

    This is the FXO marking, I hope its not to small.
    Attached Files

    Comment


      #3
      fxo were one of the factories that did the final assembly of the guns - though the individual parts may have come from elsewhere?

      I don't know if all MP44 barrels were marked or not - I presume the wartime ones would of had the makers codes on?
      Just had a look at mine and it is coded as qlv which is Erma and is marked with the Eagle/280.

      aqr is R & O Lux, Metallwaren- und Maschinenfabrik A.-G., Marienthal-Bad
      Liebenstein in Thuringen I believe?

      Comment


        #4
        There are some pictures of the markings on mine in this thread here...

        Comment


          #5
          mp44

          aqr marking
          Attached Files

          Comment


            #6
            Originally posted by Jeroen View Post
            Hello, I have some questions about the MP44, please give me your opinions about it.
            Are all the barrels makermarked, or did they resume this at the and of the war?
            The picture that I show here has the lettercode of Haenel, FXO is this the common letter type ? I have never seen this one.
            What is the meaning of the lettercode aqr?

            All comments are welcome
            Germans liked marking codes and WaAs so you'd probably find them on almost every single part even the smallest ones.

            I've seen barrels makred with 'bnz' (Steyr), 'fxo' (Haenel) and 'ayf' (Erma).

            Time Bandit is right about the 'aqr' code owner. You can also google out most of the codes.

            Regards
            Jacek

            Comment


              #7
              Originally posted by Jeroen View Post
              aqr marking
              Mine has the hand guard marked the same with 'aqr'...

              Comment


                #8
                Mp44

                Thanks for the information guys.

                What I meant about the FXO marking is the shape of it. This letters lean forward look at the " O " there you can see it for the best.

                Or were there different kind of stamps that they use? What I sure can believe. Are there any of you guys who have FXO stampings on a mp44?
                How do they look like?

                Thanks

                Comment


                  #9
                  Mp44

                  Close- up OF the FXO.
                  Attached Files

                  Comment


                    #10
                    Mp44

                    FXO code on a luger clip. This kind of lettering have I seen in the book
                    "The mkb 42, mp43,mp44 and the sturmgewehr44" from the propaganda photo series Vol.4. on the MP44 page 53
                    Attached Files

                    Comment


                      #11
                      Looks like fxo was eletropenned or something. cos is Merzwerk (sp?) is stamped on your gun and was also a major manufacturer of 44's (IIRC). The fxo on my 44 bolt carrier and magazines look like the ones on that pictured magazine

                      Comment


                        #12
                        Do you know any handguard maker who had used an 'x' code or had 'x' in the code? I have one of this kind.

                        I've also found that single 'x' was possibly used by Rheinisch-Westfaelische Sprengstoff.

                        Can anyone help me?

                        UPDATE: Ok, I got it. It's a 'Lx' signature - but who owned it?
                        Last edited by dect; 02-13-2007, 01:15 PM.

                        Comment


                          #13
                          I would say the chances are good that the East Germans produced some MP-44 parts until they recieved or produced enough AKs.

                          But however they did produce 8mm Kurz postwar.

                          Comment


                            #14
                            Here are my Haenel assembled MP44 receivers. What I've noticed on the ones I have here is that the later they are, the more the fxo looked italicized.















                            Craig

                            Comment


                              #15
                              Originally posted by Jeroen View Post
                              Hello, I have some questions about the MP44, please give me your opinions about it.
                              Are all the barrels makermarked, or did they resume this at the and of the war?
                              The picture that I show here has the lettercode of Haenel, FXO is this the common letter type ? I have never seen this one.
                              What is the meaning of the lettercode aqr?

                              All comments are welcome
                              Hi there,
                              I stripped my MP44 and I find out my one also stamped FXO.
                              Cheers
                              Mike

                              Comment

                              Users Viewing this Thread

                              Collapse

                              There are currently 5 users online. 0 members and 5 guests.

                              Most users ever online was 10,032 at 08:13 PM on 09-28-2024.

                              Working...
                              X