BunkerMilitaria

Announcement

Collapse
No announcement yet.

Spange ,,Prager Burg''

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Spange ,,Prager Burg''

    Forum members, what say you about these clasps?
    I have taken the liberty of classifying them into type A and B. Type A is the "standard" strike, with wide pointed prongs. I have in my experience, seen these bars unmarked, and marked L/12 on both the center reverse and toward the edge.
    Type B is from a different die altogether, with thin prongs. The example here is marked L/11. These (again, in my experience) appeared mostly on mounted groups or single medals (I have never seen one of these bars attached to one of the standard, pinback awards).
    That being said, when I was collecting these (late 1980's through mid 1990's) the "conventional wisdom" was that I am calling Type B were definitely no good, although there was some speculation that they were indeed some sort of "spangestuck" that were available to those making private purchase medal bars.
    Please don't confuse these with the bars that are are pretty obviously "no good" that have been out there for quite some time.

    All comments are appreciated and welcomed. For the record I myself am quite...unsure!

    Thanks,
    Greg

    PS
    As a side note for those with sharp eyes...does anyone see (on the type A's that you have) anything at the bottom of the first bit shrubbery from the left?

    G.

    #2
    Prager Burg

    A obverse
    Attached Files

    Comment


      #3
      Prager Burg

      B obverse
      Attached Files

      Comment


        #4
        PragerBurg

        Obverse
        A top
        Attached Files

        Comment


          #5
          Prager Burg

          Reverse
          A top
          Attached Files

          Comment


            #6
            Prager Burg

            A mounted
            Attached Files

            Comment


              #7
              Prager Burg

              B mounted
              Attached Files

              Comment


                #8
                Here's another one for you.

                Don
                Attached Files
                pseudo-expert

                Comment


                  #9
                  The reverse.

                  Don
                  Attached Files
                  pseudo-expert

                  Comment


                    #10
                    Here is mine,It was vet purchased and was from a grouping of about 20,Im sorry I only kept 1.Jay Parisi
                    Attached Files

                    Comment


                      #11
                      the reverse unmarked with wide pins
                      Attached Files

                      Comment


                        #12
                        Here's another variant with thin prongs...It measures 22mm X 7.5 mm approx.
                        Note the steeple touches the inner frame onthis one...
                        Attached Files

                        Comment


                          #13
                          This too is on a single mount...
                          Attached Files

                          Comment


                            #14
                            Hi Greg,

                            I have one as part of a parade mount:
                            Attached Files

                            Comment


                              #15
                              Here is Prague Bar up close. Maker Marked L/12 on the side like the one above
                              Attached Files

                              Comment

                              Users Viewing this Thread

                              Collapse

                              There are currently 4 users online. 0 members and 4 guests.

                              Most users ever online was 10,032 at 08:13 PM on 09-28-2024.

                              Working...
                              X