Here's a bayonet I stumbled onto last October. Unfortunately I don't have the Carter Bayonet Reference books, but this one is apparently Ersatz Bayonet #56, from what I understand.
Unit marked: 1 E. M.G. K.XIII.A.K. (if I am reading the markings correctly).
I haven't tried my Evaporust product on the scabbard yet. From my experience with the product it looks like the small area of rust build up should come off nicely, and most likely there is no pitting to the metal underneath.
One side of the blade is a bit odd, as the black area on the blade almost looks like some sort of very thin plating has worn off from the steel. Any thoughts on this?
Best Regards,
Alan
Unit marked: 1 E. M.G. K.XIII.A.K. (if I am reading the markings correctly).
I haven't tried my Evaporust product on the scabbard yet. From my experience with the product it looks like the small area of rust build up should come off nicely, and most likely there is no pitting to the metal underneath.
One side of the blade is a bit odd, as the black area on the blade almost looks like some sort of very thin plating has worn off from the steel. Any thoughts on this?
Best Regards,
Alan
Comment