Originally posted by BrunoH
View Post
-
Hammer is not blocking, but I tried opening it when I had trigger pulled back. -
I am not having any luck trying to open it, so any help would be appreciated.
Thank youComment
-
Hello,
Don't you forget to press on the button on the left side of the LP ? Just to be sure.....
RegardsComment
-
It is not the LP that I am having problem it is DUV 41. Thank youOriginally posted by BrunoH View PostComment
-
It is a simple release mechanism like the Walther gun. Does the lever push down and forward like the Walther example? If it does, the only think I can think it goo or some material holding the barrel/breach in place on the frame. A spring should be pushing it up.Comment
-
Hi Raiko,
like Joe sais, try to push the lever forward and tehn it sould open with no problem. If it doesn`t move, theer is something stuck. Then you have to do the following: take a proper flat tool to push the main bolt (the one that holds frame and barrel together) through. You will need a small hammer as well.
Be careful and make sure that you dont´t loose the spring that pushes normally the barrel open. The spring is located next to the bolt that you remove.
This is the only way to seperate the parts if it is really stuck. It will work as well even when there is an empty shell stuck.
Once it is seperated you can see what teh problem was. Assembling is quite easy, if you need help let us know.
regards,
Martin
http://www.freeimagehosting.net/imag...21e07ba444.pngComment
-
I will take it apart today when I came back from work. Thank you guys for your help.
Joe, DUV opens the same way as the W. This guns were not opened for over 40 years, so it could be that their is something inside. But I opened every one of them before I bought them, but after I got home it will not open again.
Thank you one more time guys.
Regards RajkoComment
-
It was old grease inside of the spring. So after I cleaned it and put new oil on it it works great. Thank you for your help.
Regards RajkoComment
-
Comment
Comment