Umformer SEUa1 Power Supply Plug

[Satcong101]

Evening Gents,

Little update to my project to restore my Fusprech.f to working condition. A few months ago I obtained the missing tube from Germany with some help from fellow collectors here (thanks again) and managed also to find the plugs required to connect the Umformer to the Fusprech.f.
The problem I am experiencing now is finding the power-in plug. I've watched eBay.de for several months (missing a couple) and searched various other sites but I cannot seem to get hold of the right plug. I've added a few pictures (below) to illustrate what I need, the pin holes should measure 25mm between centres and each is a different size so you can not mix in the input polarity.
If anyone has a spare or know where I might find one I'd be most grateful for the help.

Thanks Simon.

[la5he@yahoo.no]

Little update to my project to restore my Fusprech.f to working condition. A few months ago I obtained the missing tube from Germany with some help from fellow collectors here (thanks again) and managed also to find the plugs required to connect the Umformer to the Fusprech.f.
The problem I am experiencing now is finding the power-in plug. I've watched eBay.de for several months (missing a couple) and searched various other sites but I cannot seem to get hold of the right plug. I've added a few pictures (below) to illustrate what I need, the pin holes should measure 25mm between centres and each is a different size so you can not mix in the input polarity.
If anyone has a spare or know where I might find one I'd be most grateful for the help.
Thanks Simon.

It seems to be the same cable as used for 5WS-U5. iN that case I can help you.

rgds Ragnar

[rv12p2000]

Hello

It is probably a link for loudspeaker see this post

http://dev.wehrmacht-awards.com/foru...d.php?t=254089


regards Rv12p2000

[Val]

L.S.Fu.a doesn't need polarized plug. Germans had the polarized 12v plug, one hole 5mm, other 4mm, this input for SEUa.

[Val]

How SEUa 12v input looks like.

[Satcong101]

Hey thanks for the response and help guys

I'm not looking for a cable, just the plug ideally. Here's a picture of my Umformer and the socket I need the plug to fit. Indeed as you've mentioned Val, one pin is slightly larger than the other.