Prinzen 1914 EK2

[gregM]

HI Guys,
I just got this today and I would like to share it.
This is my first prinzen EK. The silver frame is just over 34mm and the ribbon
is 20 mm wide. It appears to be maker marked very faintly. It looks like it is
marked GODET with the name being stamped very lightly on the inner edge
of the jump ring. I had to use a 14X loop and could just make it out. I would like
your opinions.

Thanks ,
Greg

[Biro]

I had to use a 14X loop and could just make it out. I would like
your opinions.Thanks Greg

Can you put the loop up to the camera lens and take a picture of the maker mark Greg..?

I would love to see this..is it 'G' or full 'GODET' marked?

M

[gregM]

For Biro,

Here is a close-up of the ribbon ring. The G and O are pretty well defined, The T is very faint, The D and E are hard to tell what they are. I could not get a good angel for the picture. This is REALLY small. The ribbon ring is only slightly over 5mm in dia.

Greg

[gregM]

I would like to take back what I said about the makers mark on this cross.
What I thought was a faint "Godet" stamped into ribbon ring was nothing
more than tool marks scratched into the ring. I was able to borrow a digital
camera to get a picture of it.

SORRY