Jagdpanzer IV 120 mm scale - resin model

[bigtank]

Hello
Thank you for your nice comments .. Finally, I finished the front plate. In the photo ready for the moment goes to silicone. I hope that tomorrow will be glued to the bath
Regards-Andy

[ethreecee]

I love the welding! OUTSTANDING!!!!

[bigtank]

Hello
Unfortunately I had to improve some things but at this detail. I hope that you can see the difference .... the pictures my fun with Zimmerit ..... a few days will become longer want on tracks
Ethreecee also like to weld, but only for models
More photos on the blog ..
Andy

[Jeff V]

Great work Andy! What putty are you using for the zimmerit?
best wishes,
jeff

[bigtank]

Hello
This is a epoxy resin filler , Jeff - 5 KG plus hardener tin 2.5 KG. As for me, is outstanding, it can weld, patch holes, and of course do Zimmerit ...... Earned for the fun of this little gadget in the armor
Regards-Andy

[Jeff V]

Nice Andy! The resin fillers I have used in the past dry too fast,work time is only around 5 to 10 minutes. I will have to look for a slower drying material.
best wishes,
jeff

[bigtank]

Hello
With my putty I work about one hour, Jeff, you'll find similar .... Today only a small picture .... More on my blog ..
Regards-Andy

[Jeff V]

Looks great Andy! I will look for some similar putty. Thanks,
jeff

[Federico Perez]

Superb,simply...SUPERB model and craftmanship!!!!!!!!!!!

[bigtank]

Federico - try a little in line with trends to build my model . In the picture ready to suspend the rear wheel ....
Greetings to all - Andy
More photos, of course, on my blog


http://bigtank120.blogspot.com/

[tinmantis]

absolutely incredible!
I just love the paint, and very much appreciate the information on your blog
your models are beyond belief!!!
regards
jon

[tinmantis]

... and I've just seen your MkV
you are light years above me! congrats! a true inspiration, a god of modelling!
I will be trying my best to copy your skills
regards
jon

[bigtank]

Tinmantis.
I'm happy that my Mark is pleasing to Thee .... Sometimes I look at your model and begins to look pretty. Sponsony are already very good. What are you plans?. It is possible that someday I will also do a model Mark IV. In the photo trying on the rear wheel ...
Regards - Andy

[bigtank]

Hello again
.. And the last picture is a bathtub on wheels. Now I start to build wings - for a long time, you will have peace of mind
Regards - Andy

[tinmantis]

Hi Andy
a question about your MkV...
did you find evidence of rivets on the top or bottom plates of the sponsons?
regards
jon