I agree, all looks to be in good condition, so there shouldn't be anything fundamentally wrong. Are the blades on the antenna switch all properly aligned?
Fortunately the 100 W.S. is relatively easy to service, plenty of space and everything screws apart. By undoing the four screws around the control switch you should be able to move the switch just enough to disengate the gears between 3a and 3b so you can tell in which part of the switch your problem lies.
By the way, is the position shown the furthest left that the switch will turn? The switch should sit in the middle of the "Aus" position. Perhaps somebody has simply misaligned the gears between 3a and 3b....
regards,
Funksammler
Fortunately the 100 W.S. is relatively easy to service, plenty of space and everything screws apart. By undoing the four screws around the control switch you should be able to move the switch just enough to disengate the gears between 3a and 3b so you can tell in which part of the switch your problem lies.
By the way, is the position shown the furthest left that the switch will turn? The switch should sit in the middle of the "Aus" position. Perhaps somebody has simply misaligned the gears between 3a and 3b....
regards,
Funksammler
Comment