KC case

[m-e-h-t]

Hi collectors,

for me a wartime case, but I would like to hear your comments. metal parts are magnetic.

Is it possible to determine the maker?

Thanks!

[m-e-h-t]

2

[Harry]

Hard to tell on these pics, but the paper leatherette covering has an unusual pattern

[Tom B]

If you show this on the "Cases & Packets" forum below you should get some excellent answers....those guys are "Good" Tom

[m-e-h-t]

If you show this on the "Cases & Packets" forum below you should get some excellent answers....those guys are "Good" Tom

ohh, thanks Tom!

Udo

[Allan P.]

Any chance of some better pictures?

The hinge stright on?

The white satin lining on the inside of the case?

Section between the base and top?

Is there an insert for the RK in the base?

Thanks,

Allan

[m-e-h-t]

Any chance of some better pictures?

The hinge stright on?

The white satin lining on the inside of the case?

Section between the base and top?

Is there an insert for the RK in the base?

Thanks,

Allan

sorry, no additional pics are available.

[Rich G]

sorry, no additional pics are available.

You'll have to make your own assessment then because without better detail it could go either way.

[eiger]

100% not wartime!
Regards alex

[Tom B]

100% not wartime!
Regards alex

Please explain why not wartime. Thanks, Tom

[eiger]

Hello,
i will try it but my english is incorrect.
So for a quick answer it would be easier
if somebody could translate?

Die Bespannung (Lederimitat) besteht bei diesem Etui aus Stoff/Tuch das schwarz ist.
Dieses Tuch ist mit einer Masse (Farbe/Lack) bestrichen,
welche wahrscheinlich durch ein Druckverfahren eine Struktur annehmen
kann, wie Leder aussieht. Also quasi wie das alte Lederpapierimitat aussieht aber
aus Stoff ist der bestrichen ist. Das Tuch ist zu erkennen durch die vielen kleinen
Löcher die durch die Struktur kommen. Zu erkennen auf dem Foto um den
Drücker herum. Dort sieht man den Stoff mit Farbe und heiler Struktur.
Am Schanier sieht man den gleichen Stoff, nur das dort der Stoff mal
abgezogen wurde und durch das abziehen die strukturgebende
Farbe abgeplatzt ist. Deshalb ist am Schanier nur die Struktur des Tuches zu erkennen
und nicht die uns täuschen sollende.
Regards alex

[codytrcollector]

"The cloth (imitation leather) consists in this case of fabric/cloth is black. This cloth is with a mass (color/paint) coated, which will probably be able to accept a structure by a printing process , such as leather looks like. So to speak as the old Lederpapierimitat looks like but from the coated material is. The cloth is to recognize the many small holes through the structure. On the photo to see around the printer . There, one sees the fabric with color and healer structure. On the hinge, you can see the same substance, the only time there has been disconnected and the substance by disconnecting the structural color chipped. Therefore only the structure of the hinge is on the cloth and not to replace the US sollende"
Yours faithfully, alex

Their you go, best I could do.
Youthcollector1

[eiger]

Hello codytrcollector,
thank you very much for the translation.
Perfect!
Regards alex

[codytrcollector]

You are quite welcome Alex. And thank you for your thanks. I have no former experience in KC cases, so I will not attribute a opinion to this discussion. However, good luck in your quest to the thread started.

youthcollector1

[m-e-h-t]

Thanks all for your input. I will pass on this item.